Feline Panleukopenia Virus Antibody (FPV Ab) Test Kit is used for rapid qualitative detection of Feline Panleukopenia Virus Antibody ,It can be used for Feline Panleukopenia Virus Antibody screening and auxiliary diagnosis.
Feline Panleukopenia Virus Antibody (FPV Ab) Test Kit is used for rapid qualitative detection of Feline Panleukopenia Virus Antibody ,It can be used for Feline Panleukopenia Virus Antibody screening and auxiliary diagnosis.
[Product Highlights]
1.High sensitivity, strong specificity.Adopt the double-antibody sandwich immunochromatography method, achieve the sensitivity and specificity of the products by the specific binding reaction,with high accuracy.
2.Advanced technology, GMP quality assurance
Stick to the high-standard and demanding production process, own a 100,000-level purification production workshop
3.Convenient and safe storage
Can be stored at 2-30℃; Sealed packaging, light and moisture proof, not affected by the external environment
4.Fast detection, easy operation
Home self-test products, fast and accurate detection, safe, economical and worry-free.
Components | Specification | ||
1T/box | 20T/box | 25T/box | |
Reagent card | 1 | 20 | 25 |
Diluent pipe | 1 | 20 | 25 |
Instruction | 1 | 1 | 1 |
Note: according to the packaging specifications, other equipment can be purchased or contact the manufacturer.
【Self-contained appliance】
Timepiece
【Storage and expiration date】
The kit is stored at 2-30℃. Do not freeze. Valid for 24 months; After the kit is opened, the reagent should be used as soon as possible.
【Sample requirement】
Samples should be tested on the same day; Samples that cannot be tested on the same day should be stored at 2-8 ° C, and those that exceed 24 hours should be stored at -20 ° C.
【Inspection method】
1.Before use, restore the kit to room temperature (15-30℃).
2.Take out the test card from the aluminum foil bag, place it on a clean platform.
3.Unscrew the top cap of the diluent tube containing the sample,invert the diluent tube, squeeze the tube wall, add 3-5 drops of the sample mixture to the sample well (S hole) of the test card.
4.Read the results in 10-15 minutes. The result is invalid after 15 minutes.
Positive: Both the quality control line (C line) and the test line (T line) appear
Negative: Only the quality control line (C line) is available
Invalid: Quality control line does not appear, take a new device to retest
1. This product is only used for qualitative testing and does not indicate the virus level in the sample.
2. Test results of this product are for reference only and should not be used as the sole basis for diagnosis and treatment, but should be made by a physician after evaluating all clinical and laboratory evidence.
3. A negative result may occur if the viral antigen present in the sample is below the detection limit of the assay, or if the antigen detected at the disease stage at which the sample was collected is not present.
4. The operation should be carried out in strict accordance with the instructions. Do not use expired or damaged products.
5. The test card should be used within 1 hour after opening; If the ambient temperature is higher than 30 ° C or more humid, it should be used immediately.
6. If the T line has just begun to show color, and then the line color gradually fades or even disappears, in this case, the sample should be diluted several times and tested until the T line color is stable.
7. This product is a disposable product. Do not reuse it.